You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information) using the control panel as follows.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
This function resets all wired and wireless network settings to the factory default.
-
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
-
Press Menu.
-
Press the Up or Down Arrow key to choose Network. Press OK.
-
Press the Up or Down Arrow key to choose Network Reset. Press OK.
-
Press 1 to choose Reset.
-
Press 1 to choose Yes for reboot.
-
The machine will re-start, re-connect cables once this is complete.
<For touchscreen models>
-
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
-
Press MENU on the LCD screen.
-
Press Network.
-
Press the Up or Down Arrow key to display Network Reset and then press Network Reset.
-
Press Yes.
-
Press Yes for 2 seconds to confirm.
-
The machine will re-start, re-connect cables once this is complete.