HL-L9200CDWT
Usein kysytyt kysymykset ja vianmääritys |
What is the recommended paper?
Europe | USA/ Canada/ Latin America | |
Plain paper | Xerox Premier TCF 80 g/m2 Xerox Business 80 g/m2 |
Xerox 4200 20 lb Hammermill Laser Print 24 lb (90 g/m2) |
Recycled paper | Xerox Recycled Supreme 80 g/m2 | (No specific brand recommended) |
Labels | Avery laser label L7163 | Avery laser labels white #5160 |
Envelope | Antalis River series (DL) | (No specific brand recommended) |
Glossy paper | Xerox Corotech+ Gloss Coated 120/m2 |
NewPage Futura Laser Gloss Xerox Digital Color Elite Gloss |
Paper Size | Paper type | No. of sheets | |
Standard paper tray (Tray 1) |
A4, Letter, Legal *1, B5 (JIS), Executive, A5, A5 (Long Edge), A6, Folio *1, *2 |
Plain paper, Thin paper, Recycled paper |
up to 250 sheets [80 g/m2 (20 lb)] |
Multi-purpose tray (MP Tray) |
Width: 76.2 to 215.9 mm (3.0 to 8.5 in.) Length: 127 to 355.6 mm (5 to 14 in.) |
Plain paper, Thin paper, Thick paper, Thicker paper, Bond paper, Recycled paper, Bond paper, Labels, Envelopes, Env. Thin, Env. Thick Glossy paper *3 |
up to 50 sheets [80 g/m2 (20 lb)] 3 Envelopes 1 Glossy paper |
Optional lower tray (Tray 2) |
A4, Letter, Legal *1, B5 (JIS), Executive, A5, Folio *1, *2 |
Plain paper, Thin paper, Recycled paper |
up to 500 sheets [80 g/m2 (20 lb)] |
*1: Legal or Folio size paper are not available in some countries.
*2: Folio size is 215.9 x 330.2 mm (8.5 x 13 in.).
*3: Load only one sheet of Glossy in the MP tray.
*4: Tray2 is standard on HL-L9200CDWT.
The following paper specifications are appropriate for this machine:
Basis weight | 75-90 g/m2 (20-24 lb) |
Thickness | 80-110 μm |
Roughness | Higher than 20 sec. |
Stiffness | 90-150 cm3/100 |
Grain direction | Long grain |
Volume resistivity | 10e9-10e11 ohm |
Surface resistivity | 10e9-10e12 ohm-cm |
Filler | CaCO3 (Neutral) |
Ash content | Below 23 wt% |
Brightness | Higher than 80% |
Opacity | Higher than 85% |
The machine is designed to work well with most types of xerographic and bond paper. However, some paper variables may have an effect on print quality or handling reliability. Always test samples of paper before purchasing to ensure desirable performance. Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
Some types of paper may not perform well or may cause damage to your machine.
DO NOT use paper:
If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement.
Most envelopes can be used with your machine. However, some envelopes may have feed and print-quality problems because of the way they have been made. Envelopes should have edges with straight, well-creased folds. Envelopes should lie flat and not be of baggy or flimsy construction. We recommend printing a test envelope to make sure the print results are what you want.
If you use any of the types of envelopes listed above, they may damage your machine.This damage may not be covered under any Brother warranty or service agreement.
Most labels can be used with your machine. Labels should have an adhesive that is acrylic-based since this material is more stable at the high temperatures in the fuser unit. Adhesives should not come in contact with any part of the machine, because the label stock may stick to the drum unit or rollers and cause jams and print quality problems. No adhesive should be exposed between the labels. Labels should be arranged so that they cover the entire length and width of the sheet. Using labels with spaces may result in labels peeling off and causing serious jams or print problems.
all labels used in this machine must be able to withstand a temperature of 200 degrees centigrade (392 degrees Fahrenheit) for a period of 0.1 seconds.
Labels can only be fed through the multi-purpose tray.