FAQs & Troubleshooting

The method of creating a banner label using "White Continuous Length Paper Tape 62mm (DK-22205)" is described below:
 

1. Insert the DK roll
   
   
   
   Insert the "White Continuous Length Paper Tape 62mm" into your QL printer. This DK roll is provided as a starter roll with the QL printer. Separate purchase may be necessary when using another QL printer.
    

2. Select the Tape Length
   
   Start P-touch Editor.
   In the Command bar, click  to display the paper inspector.
   
   Set the label width to 62 mm (2-3/7"), and set the label length to "Auto".
   
       
    

   If you don't want the inspector to appear, click . If you want it to appear again, click the button again.

3. Add clip art to the banner
   
   Click  and then . The Clip Art Gallery dialog box will appear.
   
   
   
   Choose the category you like from the Category pull-down menu and select a piece of clip art, then click "OK".
   
   The selected clip art will be placed on the label. You can reposition it anywhere.
    

4. Enter the text
   
   Click , and then click anywhere on the layout window.
   
   Type the text.
   
   
   
   Adjust the font, size and style of the text using the text inspector.
   
   Click    on the Draw/Edit toolbar, and then click on the text object. Small squares called handles will appear around the text. Adjust the position of the text object by dragging it with the mouse.
   
   
    

5. Print the label
   
   Click  to open the print dialog box and click "Print".
   
   
   Completed label
   
   
   Peel the printed label from backing and apply the label.