HL-2700CN
FAQs & Troubleshooting |
How do I install the optional Duplex Unit?
Turn off the printer power switch and unplug the printer.
Remove the duplex upper cover, duplex lower cover and duplex cap at the back of the printer. We recommend removing the covers and the cap with a coin or a screwdriver.
Remove the protective part.
Use the handholds of the duplex unit to lift it up.
Insert the bottom of the duplex unit into the grooves in the printer, and then insert both the hooks of the duplex unit to the holes of the printer.
Open the duplex back cover and duplex inside unit.
Pull out the 2 green sleeves covering the screws as far as they will come. Turn the green sleeves to tighten the screws of the duplex unit to the printer. Once the screws are fully tight, push the green sleeves back in.
Put the hook on the left hand side of the duplex unit into the hole of the printer. Secure the screw of the duplex unit to the printer.
Connect the connector cable to the printer.
Plug the printer into the AC power outlet/socket and turn on the printer power switch.