HL-2150N
 |
FAQs & Troubleshooting |
What is the recommended paper?
We recommend the following paper types for this printer.
| Paper Type | Europe | USA |
| Plain paper |
Xerox Premier TCF 80 g/m2 |
Xerox 4200DP 20 lb Hammermill Laser Paper (24 lb=90 g/m2) |
| Recycled paper | Xerox Recycled Supreme 80 g/m2 | - |
| Labels | Avery laser label L7163 | Avery laser labels white #5160 |
| Envelope | Antalis River series (DL) | - |
- Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.
- Use paper that is made for plain-paper copying.
- Use paper that is 75 to 90 g/m2 (20 to 24 lb).
- Use neutral paper. Do not use acidic or alkaline paper.
- Use long-grain paper.
- Use paper with a moisture content of approximately 5%.
- This printer can use recycled paper that meets the DIN 19309 specifications.
- DO NOT use ink jet paper because it may cause a paper jam or damage your printer.
- Preprinted paper must use ink that can withstand the temperature of the printer's fusing process (200 degrees centigrade).
- If you use bond paper, paper having a rough surface or paper that is wrinkled or creased, the paper may exhibit degraded performance.
If you use paper that is not recommended, a paper jam or misfeed may occur in the printer.