FAQs & Troubleshooting
How do I remove or attach the presser foot ?
Turn off the machine.
Raise the presser foot lever.
|(1) Presser foot lever|
Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
|(1) Mark on the handwheel|
Remove the presser foot by pulling it vertically downward.
|(1) Presser foot holder
(2) Presser foot
Put a different presser foot on the needle plate so that the bar on the presser foot is in line with the slot on the shank.
If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury.