SAPPORO
FAQs & Troubleshooting |
How do I change the needle ?
Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated.
Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.
(1) Flat side
(2) Needle type marking |
If the distance between the needle and the flat surface is not even, the needle is bent.
Do not use a bent needle.
(1) Flat surface |
(1) Mark on the handwheel |
(1) Presser foot lever |
Before replacing the needle, cover the hole in the needle plate with fabric or paper to prevent the needle from falling into the machine.
(1) Use a screwdriver |
(1) Use a screwdriver (2) Needle stopper (3) Needle |
Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.