SAPPORO
FAQs & Troubleshooting |
How do I remove or attach the presser foot ?
Turn off the machine.
Raise the presser foot lever.
(1) Presser foot lever |
Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
(1) Mark on the handwheel |
Remove the presser foot by pulling it vertically downward.
(1) Presser foot holder (2) Presser foot |
Put a different presser foot on the needle plate so that the bar on the presser foot is in line with the slot on the shank.
(1) Shank (2) Bar |
If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury.