Innov-is 4000D/4000
FAQs & Troubleshooting |
How do I thread my machine using the Automatic Threading Button?
Press in that order to display a video example of the operation on the LCD.
Follow the steps explained below to complete the operation.
How do I manually thread my machine?
How do I thread my machine for use with the twin needle option?.
Turn the main power to ON.
Press the "Needle Position" button to raise the needle.
If you try to thread the needle automatically without raising the needle, the thread may not thread correctly.
Pivot the spool pin so that it angles upward.
Set the thread spool on the spool pin so that the thread unwinds from the front of the spool.
Spool pin Spool cap Thread spool |
Push the spool cap onto the spool pin as far as possible, then return the spool pin to its original position.
When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the thread spool.
Spool cap(small) Thread spool(cross-wound thread) Space |
Holding the thread with your hands, slide the thread into the grooves on the thread guide plate.
Thread guide plate |
While holding the thread in your right hand, pass the thread through the thread guide in the direction indicated.
When finished pulling the thread through the thread guide, cut the thread and leave the thread in position.
Cutter |
Press the "Automatic Threading" button to have the machine automatically thread the needle.
* The upper threading is finished.
When the "Automatic Threading" button is pressed, the presser foot will be automatically lowered.
In case the needle is not completely thread, slowly pull the loop of the thread through from the back of the needle.
About 50mm(approx.2inches) |
If you use an improper needle and thread combinations, the hook may sometimes get caught in the needle.
If this happens, remove the hook from the needle as described below.
The needle thread carrier will automatically thread the needle when the "Automatic Threading" button is pressed.
Be sure to keep your hands and other items away from the needle area, otherwise injuries may occur.