Print  |  Close

PT-2480

FAQs & Troubleshooting

FAQs & Troubleshooting

How to calibrate a printed label.

If the length of the printed label does not correspond to the length specified with the Length function, the printed label length can be recalibrated with the Length Adjust function by selecting a setting between -1 and +3.
 (The default setting is 0.)
 

  1. Press Code key, then Setup key.
  2. Press Left cursor key or Right cursor key until "LENGTH ADJUST" is displayed.
  3. If the printed label is shorter, press Up cursor key. If the printed label is longer, press Down cursor key.

Print  |  Close