SDX1250
![]() |
FAQs & Troubleshooting |
Draw Patterns with Calligraphy Pen
This FAQ describes the process of using the calligraphy pen after creating data.
You must activate the Calligraphy Starter Kit and create the pattern before drawing. Refer to the linked FAQs.
![]() |
![]() |
![]() |
The following screen appears, click [OK].
Touch .
After adjusting [Draw Pressure] and [Draw Speed], click [OK].
Touch [Start] key to start drawing.
>>When drawing is finished, a message appears in the screen. Touch [OK] key to display the preview screen.
Before feeding out the mat, check the result, taking care not to touch the material.
Check the result of the material without feeding out the mat or touching the material.
![]() |
![]() |
![]() |
![]() |
If the result is as shown on the right, rotate the pen 180 degrees, and then draw again on top of the previously drawn pattern touch [Start] key in the preview screen .
Rotate the pen 180 degrees, refer to What Should I Do if the Text or Patterns Drawn with the Calligraphy Pen are Faint? to Cause 2 : The tip of the pen does not touch the material (paper) well.
Drawing on top of the pattern will make the drawn color darker, depending on the color of the pen.
Feed out the mat, and then carefully peel the material from the mat.