Dos |
Don'ts |
-
Use a 12" x 12" (305 mm x 305mm) cutting mat with CaptureMat function which is compatible with DesignNCut.
|
-
Do not use 12" x 24" (305 mm x 610 mm) cutting mats or mats without the CaptureMat Function. They will not work with DesignNCut.
|
-
Use patterns that are clearly drawn, without gradation, fading and/or blurriness.
|
|
-
Make sure that the camera lens is clean and not dirty.
-
Set the picture size ratio of the camera as 4:3.
If the setting is 16:9, change it to 4:3.
|
|
-
Attach the material inside of the adhesive area of the mat.
*Attach a part to be cut to the center of the mat.
|
-
When taking a photo, do not zoom or use a flash.
|
-
Place the mat on a flat surface to photograph.
|
|
-
Hold the device and make sure that it is level.
|
-
Do not misalign the device and mat.
-
Do not take the photo at a far distance from the mat.
-
Do not take the photo too close to the mat.
![image image](/g/b/img/faqend/faqh00100736_000/eu_ot/en/1801805/faqh965_fig00002.gif)
|
-
Photograph the entire 12" x 12" (305 mm x 305 mm) cutting mat with nothing else around your mat.
|
|
-
When photographing, make sure that there are no objects or shadows on the mat.
|
-
Do not photograph under a bright light.
|