"E3" message appears on the LCD.
![E3 E3](/g/b/img/faqend/faqh00000061_002/eu_ot/en/1932756/faqh0061_fig1001.gif)
Cause
This message is displayed when an erroneous operation is performed as follows.
-
The Start/Stop button is pressed while the buttonhole or bar tack stitch is selected and the buttonhole lever is raised.
-
The Reverse/Reinforcement stitch button is pressed while the buttonhole or bar tack stitch is selected and the buttonhole lever is raised.
-
The foot controller is pressed while the buttonhole or bar tack stitch is selected and the buttonhole lever is raised.
Solution
Lower the buttonhole lever before continuing the operation.