MFC-J4410DW
FAQs & Troubleshooting |
There are several reasons that the Brother machine displays "No paper Fed". Try to follow each step to clear the "No Paper Fed" message.
Cause 1: The machine is out of paper or paper is not properly loaded in the paper tray
Cause 2: The paper is jammed in the machine
Cause 3: Paper dust has accumulated on the surface of the paper pick-up rollers.
Cause 4: The Jam Clear Cover is not closed properly
Cause 5: The paper was not inserted in the center position of the manual feed slot.
Cause1:
The machine is out of paper or paper is not properly loaded in the paper tray.
Cause2:
The paper is jammed in the machine. Remove the jammed paper
Click here to see how to remove the jammed paper click here.
If this error occurs often during 2-sided copying or 2-sided printing, the paper feed rollers may be stained with ink.
Clean the paper feed rollers. Follow these steps:
If the paper support flap is open, close it, and then close the paper support.
Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may cause paper feed problems.
Cause3:
Paper dust has accumulated on the surface of the paper pick-up rollers.
Clean the paper pick-up rollers. Follow these steps:
If the machine starts to multi-feed the last few sheets of paper in the tray, clean the Base Pad (1) with a soft lint-free cloth moistened with water. After cleaning, wipe the pad with a dry, soft lint-free cloth to remove all moisture.
Cause4:
The Jam Clear Cover is not closed properly.
Cause5:
The paper was not inserted in the center position of the manual feed slot.