FAX-T106
FAQs & Troubleshooting |
The problem is that the Message Manager unit is in the F/T mode and not the Message Manager mode. The F/T mode will not allow any voice messages to be recorded.You must set up Message Manager in the following order:
<STEP1> How to setup Message Manager:
You must set up Message Manager in the following order:
<STEP2> Setting the Voice Store:
<STEP3> Setting Fax Forward/Fax Storage:
FAX FORWARD
When you select FAX FORWARD, your fax machine stores the received fax in the Message Manager memory. The fax machine will then dial the fax number you've programmed and forwards the fax message.
FAX STORAGE
If you select FAX STORAGE, your fax machine stores the received fax in the memory. You will be able to retrieve fax messages from another location using the Remote Retrieval commands.
OFF
Incoming faxes are not stored in memory, but will be printed on paper.
<STEP4> Recording the Message Manager's Outgoing Message (TAD MESSAGE):
Recording the Message Manager's Outgoing Message (TAD MESSAGE) is the second step you need to follow before you can turn on the Message Manager. Make sure your OGM (Outgoing Message) is less than 20 seconds long.
This is the only setting you can select if you want to turn the Message Manager on.
<STEP4> Activating Message Manager Mode:
Press and hold the Digital TAD key until the button lights and the screen displays TAD:MSG MGR. When Digital TAD light is out, the Message Manager is off.