TD-4420TN
Preguntas frecuentes y solución de problemas |
How to reset the printer by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
To activate printer initialization, do the following:
Parameter | Default setting |
---|---|
Speed | (TD-4420TN) 76 mm/sec (3 ips) (203 dpi) |
(TD-4520TN) 76 mm/sec (3 ips) (300 dpi) | |
Density | 8 |
Label Width | 101.5 mm (4") |
Label Height | 101.5 mm (4") |
Sensor Type | Gap sensor |
Gap Setting | 3 mm (0.12") |
Print Direction | 0 |
Reference Point | 0,0 (upper left corner) |
Offset | 0 |
Tear Mode | On |
Label Peeler off Mode | Off |
Cutter Mode | Off |
Code Page | 850 |
Country Code | 1 |
Clear Flash Memory | No |
You can also calibrate by using the BPM (Brother Printer Management Tool).