DCP-J132W
Preguntas frecuentes y Solución de problemas |
Print command (cupswrapper) (Linux)
Print Command :
lpr -P (printer name) [ -o Option] (filename)
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W: brprintconf_mfcj430w
Option Table (Available option parameter depends on your model.)
Category (available models only) | Option Parameter Example |
Media | BRMediaType=Plain |
Print Quality | BRResolution=Normal |
Bi-Dir Printing | BRBiDir=ON |
Paper Size | PageSize=A4 |
Paper Thickness | BRColorPaperThick=Thick |
Color or Mono | BRMonoColor=Color |
Color Matching | BRColorMatching=Natural |
jpeg print mode | BRJpeg=Recommended |
Half Tone | BRHalfTonePattern=Diffusion |
Slow Dry | BRSlowDrying=ON |
Duplex | BRDuplex=DuplexTumble |
Advanced Duplex Settings | BRDuplexMode=Duplex1 |
Color Enhance | BRColorEnhancement=ON |
Brightness | BRBrightness=[-20 - +20] |
Contrast | BRContrast=[-20 - +20] |
Red Key | BRRed=[-20 - +20] |
Green Key | BRGreen=[-20 - +20] |
Blue Key | BRBlue=[-20 - +20] |