HL-1212W
Preguntas frecuentes y Solución de problemas |
I cannot connect my machine to the wireless network (For Windows)
Solutions differ depending on when the issue occurs. Click a link below to find the best solution to the issue.
Your Brother machine can be connected to a wireless network in Infrastructure. In Infrastructure mode, wireless devices communicate with each other through an access point/router.
The following instructions explain how to connect your machine to a wireless network with an access point/router as the illustration below (In Infrastructure mode).
There are two methods for configuring your Brother machine for a wireless network ;using Wi-Fi Protected Setup or AOSS™ (Recommended), or manually.
If you have a WLAN access point/router supporting WPS (Wi-Fi Protected Setup) or AOSS™ (AirStation One-Touch Secure System), you can easily connect your Brother machine to your wireless network.
To use WPS or AOSS™, your WLAN access point/router must support WPS or AOSS™. Confirm your WLAN access point/router has the WPS or AOSS™ symbol as shown below.
> Click here to configure the Brother machine for a wireless network manually.
If you were able to print or scan over the wireless network, but can no longer, follow the steps below.