Innov-is XP1
Ofte stillede spørgsmål og fejlfinding |
How do I clean the race?
(1) Slide toward you.
>> The needle plate opens.
(1) Bobbin case
(1) Cleaning brush (2) Race (3) Bobbin thread sensor
Do not apply oil to the bobbin case.
If lint or dust collects on the bobbin thread sensor, the sensor may not operate correctly.
(1) mark (2) mark (3) Bobbin case
(1) Tabs (2) Notches
The cutter below the needle plate should be cleaned. If dust or lint accumulate on the cutter, it will be difficult to cut the thread when the Thread Cutter button is pressed or the automatic thread cutting function is used. Clean the cutter when the thread is not easily cut.
(1) Cutter
Do not touch the cutter, otherwise injuries may result.