CM840
![]() |
Nejčastější dotazy a pokyny pro odstraňování potíží |
"Cannot operate when there are too many patterns."
message appearing on the LCD. What does it mean?
The message appears under the following conditions.
Cause | Solution |
There are 301 or more patterns being cut in the “Direct Cut” mode. | Reduce the number of patterns being used. |
There are 301 or more patterns being saved as cutting data in the “Scan to Cut Data” mode. | |
There are too many cutting lines to be created after large number of small patterns are scanned. | Scan images again after reducing the number of patterns arranged in the original. |
There are too many light tone patterns to be converted to two-tone (black and white) patterns while the image detection level is being adjusted. |
Perform the necessary operation according to the instructions or the solution described.
If the problem persists, contact the retailer who sold you this machine or the nearest authorized service center.