How do I remove or attach the presser foot ?
-
Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the foot controller or the start/stop button is accidentally pressed and the machine starts sewing.
-
Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break.
-
Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine.
-
Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
|
(1) Mark on the handwheel |
-
Turn off the sewing machine.
-
Raise the presser foot lever.
|
(1) Presser foot lever |
-
Press the black button at the back of the presser foot holder in order to remove the presser foot.
|
(1) Black button
(2) Presser foot holder
|
-
Place a different presser foot below the holder so that the presser foot pin is aligned with the shank in the holder.
|
(1) Presser foot holder
(2) Shank
(3) Pin
|
-
Slowly lower the presser foot lever so that the presser foot pin snaps into the shank in the presser foot holder.
|
(1) Presser foot lever
(2) Presser foot holder
(3) Shank
(4) Pin
|
-
Raise the presser foot lever to check that the presser foot is securely attached.