JD2799
![]() |
FAQs & Troubleshooting |
(1) Spool pin
(2) Thread guide (back)
(3) Thread guide (front)
(4) Thread take-up lever
(5) Mark on the handwheel
(1) Presser foot lever
(1) Mark on the wheel
If the needle is not correctly raised, the sewing machine can not be threaded.
If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break.
(1) Spring
Make sure that the spring in the groove catches the thread.
(1) Thread take-up lever
If the thread take-up lever is lowered, the upper thread can not be wrapped around the thread take-up lever.
Make sure you raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
(1) Needle bar thread guide
The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand.
(1) Presser foot lever
(1) Mark on the wheel
(1) Needle holder
(2) Needle threader lever
(3) Guide
(1) Hook
(2) Thread
Hold the thread in front of the needle to make sure that the hook grabs it.
(1) Loop of thread
(1) Presser foot lever
(1) 5 cm (2 inches)
If you incorrectly feed the thread you may cause sewing problems.