CM550
![]() |
常见问题解答与故障排除 |
List of Error Messages
When the following error message appears on your machine's LCD display screen, perform the necessary operation. Refer to the solution for each error message with clicking the link in the following table.
If you cannot find the code/message you were looking for,
Error Message | Cause / Solution |
A malfunction occurred. Turn the machine off, then on again. | Turn the machine off, then on again. |
Built-in memory is corrupted. Initialize the memory. | The data on the machine’s memory is corrupted. Restart the machine. |
Cannot operate when there are too many patterns. |
Click here. |
Cannot operate when there is no pattern. |
Click here. |
Character string is too long for the mat. |
Reduce the number of characters so that the length of the character string fits in the width of the 12-inch mat (maximum possible width 297 mm). |
Includes a special pattern that cannot be saved to external memory. Save the pattern in the machine's memory. | Depending on the pattern, it may not be possible to save it to external memory (USB flash drive, computer or CanvasWorkspace(Web)). |
Initialization of the blade position failed. Turn the machine off. |
Turn the machine off, then on again. |
Initialization of the head failed. Turn the machine off. |
Turn the machine off, then on again. |
No more patterns can be added to this combination. |
301 or more patterns cannot be combined. Reduce the number of patterns. |
No pattern in the effective area. | Click here. |
Not enough available memory to save the data. | Delete a file from the machine’s memory or USB flash drive. |
Not enough space on the mat. Check pattern size, space on the mat, Cut Area (setting) or Pattern Interval (setting). |
Click here. |
Not enough space on the mat. Max: 10 (example: calculated number) |
Since there are too many patterns, they cannot be arranged. |
OK to retrieve and resume previous memory? |
To use data from the previous operation, touch the “OK” key. |
Patterns cannot be unified. Invalid pair was selected. |
Click here. |
Patterns cannot be welded. There are some patterns which cannot accept or no overlaps. |
Click here. |
Patterns may overlap since seam allowance is set to large on the machine. |
Click here. |
Scanning error occurred. Turn the machine off. | Turn the machine off, then on again, and then try performing the operation again. |
The data cannot be deleted. |
Click here. |
The data cannot be read. |
Click here. |
The data cannot be saved. |
Click here. |
The mat cannot be recognized. The mat will unload. | Click here. |
There are some patterns which cannot add seam allowance. |
The seam allowance settings cannot be specified for complex pattern shapes. Select a pattern with a simple shape. Expanding the seam allowance to 2 mm or more may help. |
There are some patterns which cannot set cutting distance from the outline. |
The cutting distance cannot be specified for complex pattern shapes. Select a pattern with a simple shape. |
There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory. | Depending on the pattern, it may not be possible to save it to a USB flash drive. |
There is a pattern out of the effective area. The pattern cannot be cut or drawn. OK to continue? | Click here. |
This data is too complicated and cannot be converted. |
When your are welding or unifying patterns : Reduce the number of patterns arranged or change the patterns to ones with simple designs. |
This mat cannot be used. |
The mat is one that cannot be used with the function being performed. Replace the mat. |