我正使用Mac OS X 10.4 Tiger. 当安装好扫描驱动程序后,却无法进行扫描,我该怎样解决这个问题?
当安装Brother扫描软件时,您的设备未作为扫描装置来选择。若重启Macintosh前,您已将USB接口电缆连接到设备中或正写入的Brother扫描软件安装版本过多,将会出现此类问题。你需将Brother设备作为扫描器来手动选择。请根据以下操作步骤,将Brother设备作为扫描器来选择。
-
关闭打印机的电源开关,并断开USB接口电缆。然后重新将USB接口电缆连接到计算机中。
-
通过点击 //Library(资源库)/Printers(打印机)/Brother/Utilities(实用程序)/ DeviceSelector(设备选择器) 文件夹中的 "DeviceSelector.app" 或点击Brother ControlCenter 2.0 左上角的 "Model(型号)" 和选择 "Other..." 来打开 "DeviceSelector".
-
打开 Hard Drive.
-
打开 "Library(资源库)" 文件夹.
-
打开 "Printers(打印机)" 文件夹.
-
打开 "Brother"文件夹.
-
打开 "Utilities(实用程序)"文件夹.
-
打开 "DeviceSelector(设备选择器)" 文件夹.
-
双击 "DeviceSelector(设备选择器)".
或
-
打开 Hard Drive.
-
打开 "Library(资源库)" 文件夹.
-
打开 "Printers(打印机)" 文件夹.
-
打开 "Brother"文件夹.
-
打开 "Utilities(实用程序)"文件夹.
-
打开 "ControlCenter" 文件夹.
-
双击 "ControlCenter".
-
选择USB连接方式. 您的设备名称将出现在列表中。选择您的设备并点击OK.
-
关闭DeviceSelector(设备选择器).
-
打开扫描应用程序进行测试.