WD-200B
 |
FAQ et Diagnostic |
How do I clean my AiRScouter?
-
Cleaning the mirror unit
Use a cotton swab moistened with ethanol to wipe off any dirt and dust on the mirror and lens cover.
-
The mirror unit consists of an optional mirror (with reflective and non-reflective sides) and a lens cover.
Lens cover
Optional Half Mirror (reflective side)
Optional Half Mirror (non-reflective side) - Always wipe the reflective side gently. If you rub it too hard, it may peel off.
-
The mirror unit consists of an optional mirror (with reflective and non-reflective sides) and a lens cover.
-
Cleaning the Head Band
If the pads attached to the Head Band are dirty, wipe them using a dry cloth.If the dirt is difficult to remove, clean the pads using ethanol.
-
Cleaning the Control Box
Wipe dust and dirt off the Control Box using a soft, dry cloth.If the dirt is difficult to remove, wipe the Control Box using a well-wrung damp cloth.