Innov-is XP1
![]() |
FAQ & Fehlerbehebung |
Fabric is caught in the machine and cannot be removed
If the fabric is caught in the machine and cannot be removed, the thread may have become tangled under the needle plate.
Follow the procedure described below to remove the fabric from the machine.
If the operation could not be completed according to the procedure, instead of attempting to complete it forcefully, contact your authorized Brother dealer or the nearest Brother authorized service center.
If the needle is lowered into the fabric, turn the handwheel away from you (clockwise) to raise the needle out of the fabric, and then remove the needle.
Presser foot Press the black button on the presser foot holder and remove the presser foot. |
|
![]() |
(1) Black button (2) Presser foot holder |
Presser foot holder Loosen the screw of the presser foot holder to remove the presser foot holder. |
|
![]() |
(1) Multi- purpose screwdriver (2) Presser foot holder screw (3) Presser foot holder |
![]() |
(1) Slide toward you. |
![]() |
(1) Bobbin case |
![]() |
(1) Cleaning brush (2) Race |
![]() |
(1) ![]() (2) ![]() (3) Bobbin case |
Align the ![]() ![]() |
|
![]() |
![]() |
(1) Tabs (2) Notches |
Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.
![]() |
(1) Flat side (2) Needle type marking |
Correct needle
![]() |
(1) Flat surface |
Incorrect needle
If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle.
![]() |
(1) Flat surface |
Never use bent needles. Bent needles can easily break, possibly resulting in injuries.
If the needle plate has been removed, check machine operations to confirm that installation has been completed correctly.
Do not yet install the presser foot and thread.
![]() |
(1) Hole in the needle plate (2) Handwheel |
The thread may have become tangled as a result of incorrect upper threading. Make sure that the machine is correctly threaded.
Remember when sewing thin fabrics, select a center stitch that is shorter in length and use the straight stitch needle plate for straight sewing stitches. A lightweight paper stabilizer can also be placed on the underside of the fabric.