PT-D800W
FAQs & Troubleshooting |
What options are available for label / tube feeding and cutting?
> For labels
> For Tubes (PT-E800T, E800TK, E850TKW only)
You can select the following 11 options.
Cut Option Table
"Cut Option No." is displayed only when selecting options using the printer's keyboard.
Cut Option No. | Auto Cut | Half Cut | Chain Printing | Image |
---|---|---|---|---|
1 | No | Yes | No | |
2 | Yes | Yes | No | |
3 | No | No | No | |
4 | Yes | No | No | |
5 | No | Yes | Yes | |
6 | Yes | Yes | Yes | |
7 | No | No | Yes | |
8 | Yes | No | Yes | |
9 | Special tape | |||
(FLe Label)* | No | - | - | |
(FLe Label)* | Yes | - | - |
* Set this cut option from a computer using the printer driver. These options cannot be set using the keyboard.
* When printing from a mobile device, these options can only be set using Mobile Cable Label Tool.
Setting Procedure:
Use the printer driver or the printer’s keyboard to select the settings.
Using the printer driver:
Select the settings in the following dialog box.
Using the printer’s keyboard (for models equipped with the keyboard):
You can select the following 4 options.
Cut Option Table
Cut Option | Description | Image |
---|---|---|
No Half Cut | The tubes are fully cut only after the last tube is printed. | |
Half Cut | The tubes are half cut in the margin before the first tube is printed and after each of the remaining tubes is printed. The tubes are fully cut after the last tube is printed. | |
Dot | A dotted line is printed in the margin before the first tube is printed and after each of the remaining tubes is printed. The tubes are fully cut after the last tube is printed. | |
Line | A solid line is printed in the margin before the first tube is printed and after each of the remaining tubes is printed. The tubes are fully cut after the last tube is printed. |
Setting Procedure:
Use the printer driver and the Printer Setting Tool, or the printer’s keyboard to select the settings.
Using the printer driver and the Printer Setting Tool:
Using the Printer’s keyboard (for models equipped with the keyboard):