Innov-is XV8500D
![]() |
FAQs & Troubleshooting |
How do I specify the sewing end point with the sensor pen for utility stitches?
Before start sewing, test the pattern first from steps 1 to 6 to see if the stitch can be used with this function.
The sensor functions screen appears.
If (Sewing end point setting key) is not available, the sewing end point cannot be specified with the selected stitch pattern.
Select a different stitch pattern.
The distance from the current needle position to the touched location appears.
Touch once | Touch twice |
![]() |
![]() |
(2) Press to erase the specified sewing end point.
(3) Press to begin sewing at the beginning of the pattern.
(4) Press to stop specifying a setting with the sensor pen.
(5) Press when sewing the same distance as the previous time to recall the previous setting.
(6) Press to select whether or not sewing is ended with a complete pattern.
![]() |
(1) Displayed distance |
Stitch End Mode Key
![]() |
The end of stitching is not adjusted.
When the end point is reached, sewing stops immediately, even if the stitch pattern is not complete. |
![]() |
![]() |
The length of the stitch pattern is adjusted so that sewing will stop at the specified end point with a complete pattern. |
![]() |
The setting can also be applied by extending the touching with the sensor pen in the adjustment area with the sensor pen.
When a sewing end point setting is specified, appears in the upper-left corner of the screen.
→ The distance from the current needle position to the touched location appears.
* The setting can also be applied by extending the touching with the sensor pen in the adjustment area with the sensor pen.
* The machine stops at the specified end point automatically.