How do I remove or attach the presser foot ?
-
Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine.
-
Press
(Needle position button) once or twice to raise the needle.
-
Press
.
![image](/g/b/img/faqend/faqh00000632_002/ca/en/1008791/faqh638_fig2002.gif)
-
When the message “OK to automatically lower the presser foot? ” appears on the LCD screen, press "OK" to continue.
-
The screen changes, and all keys and operation buttons are locked (except
).
-
Raise the presser foot lever.
![image](/g/b/img/faqend/faqh00000632_002/ca/en/1007671/faqh463_fig5009.gif) |
(1) Presser foot lever |
-
Use the included screwdriver to loosen the embroidery foot screw, and then remove the embroidery foot.
![image](/g/b/img/faqend/faqh00000632_002/ca/en/1007631/faqh632_fig2001.gif) |
(1) Screwdriver
(2) Embroidery foot
(3) Embroidery foot screw |
-
Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the embroidery foot screw.
![image](/g/b/img/faqend/faqh00000632_002/ca/en/1007632/faqh632_fig2002.gif)
-
Slowly lower the presser foot lever.
-
Raise the presser foot lever to check that the embroidery foot is securely attached.
-
Press
to unlock all keys and buttons.
![image](/g/b/img/faqend/faqh00000632_002/ca/en/1008790/faqh638_fig2003.gif)