PR1050X
Perguntas frequentes e Solução de problemas |
Aligning the embroidering position using the embroidery positioning sticker
Using the camera built into this machine and the included embroidery positioning stickers, the embroidering position can easily be aligned.
(1) Embroidery positioning sticker (2) Center of embroidery pattern (3) Embroidering area |
(1) Embroidering area (2) Embroidery pattern size (3) Embroidery positioning sticker |
The built-in camera may not be able to detect the embroidery positioning sticker if the four corners of the sticker are not firmly affixed to the fabric. Use tape to firmly affix the sticker to the fabric.
If the following error message appears, touch "OK" , remove the embroidery positioning sticker, and then affix it within the embroidering area. Then, touch again.
After all of the included embroidery positioning stickers have been used, new ones can be purchased separately. When purchasing new ones, check "Optional Accessories" on the operation manual for the part code, and then contact your nearest authorized Brother dealer.