SDX125
![]() |
Perguntas frequentes e Solução de problemas |
What should I do if the desired network SSID is not displayed when setting up the wireless network using the Setup Wizard?
If the desired network SSID is not displayed on the LCD display screen, check the following points.
If the desired network SSID is not still displayed on the LCD display screen, follow the steps below to add the SSID (Network Name), Network Key (Password), Authentication method and Encryption method manually.
Before setting up the wireless network, you must know your wireless network settings of the WLAN access point/router.
Check and record the current wireless network settings below.
SSID | |
Network Key (Password) | |
Authentication method | |
Encryption method |
If you don't know your wireless settings of your WLAN access point/router, refer to How to find the Network Name (SSID) and Network Key (Password)?.
![]() |
(1) Character input display (2) Character keys (3) Uppercase/lowercase selection key (4) Space key (5) Letter/number/special character selection key (6) Backspace key (Deletes the character at the cursor’s position.) (7) Cursor keys (Move the cursor to the left or right.) |
Some Wireless Network Name (SSID) and Network Password (Key) are case (upper case and lower case) sensitive.
If a connection is not established correctly and an error message appears, see Error messages in the Troubleshooting.