Innov-is BP1430L
![]() |
Perguntas frequentes e Solução de problemas |
How do I wind the bobbin?
![]() |
Este modelo Outros modelos 11,5 mm (aprox. 7/16 polegada) |
When winding bobbin for embroidery be sure to use the recommended bobbin thread for this machine.
![]() |
Canaleta (2) Bobbin winder shaft spring |
Slide the bobbin winder in the direction of the arrow until it snaps into place.
![]() |
Porta-carretel Tampa do carretel |
![]() |
Tampa do carretel (pequena) Carretel (linha de enrolamento cruzado) Espaço |
![]() |
Redinha do carretel (2) Spool Tampa do carretel Porta-carretel |
![]() |
(1) Thread spool insert (mini king thread spool) 12 mm (1/2 polegada) 75 mm (3 polegadas) |
![]() |
Guia da linha |
![]() |
Placa da guia da linha |
![]() |
Guia da linha (2) Pretension disk Puxe-a o máximo possível. |
Assegure-se de que a linha passe sob o disco de pré-tensão.
![]() |
(1) Guide slit in bobbin winder seat Abertura da guia (com cortador) |
Be sure to cut the thread as described.
If the bobbin is wound without cutting the thread using the cutter built into the slit in the bobbin winder seat, the thread may become tangled in the bobbin and the needle may bend or break when the bobbin thread starts to run out.
![]() |
Botão Iniciar/Parar |