NX-600
 |
Veelgestelde vragen en probleemoplossing |
"The safety device has been activated." appears on the LCD.
- The upper thread has become tangled around the bobbin case,
- The needle is bent and hitting the needle plate, so the machine stops.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.