TJ-4420TN
Veelgestelde vragen en probleemoplossing |
Schakel Bluetooth Low Energy (BLE) in of uit
Volg onderstaande stappen om Bluetooth Low Energy (BLE) in of uit te schakelen:
Voor TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:
Om Bluetooth® te gebruiken, is een optionele WLAN / BT-interface (PA-WB-001) vereist.
Om de automatische Bluetooth-herverbinding tussen uw iOS / iPadOS-apparaat en de printer uit te schakelen.
Om de automatische Bluetooth-herverbinding tussen uw iOS / iPadOS-apparaat en de printer uit te schakelen.
Voor RJ-2035B / 3035B, TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:
U hoeft Stap 2 niet uit te voeren.Ga naar stap 3.
Zorg ervoor dat u de juiste firmwareversie gebruikt voor de volgende modellen:
Model Naam | Firmwareversie |
---|---|
TD-4650TNWB / 4750TNWB / 4650TNWBR / 4750TNWBR | V1.04.S18 of hoger |
RJ-2055WB / 3055WB | B1.00.Q28 of hoger |
BT MODE "BT4.0" WLAN MODULE SAVECFG DELAY 20000 INITIALPRINTER |
BT MODE BT4.0 SET BTLINKBACK OFF |
Als BLE is ingeschakeld, wordt de automatische Bluetooth-herverbinding tussen uw iOS / iPadOS-apparaat en de printer uitgeschakeld.
BT MODE "BT2.1" WLAN MODULE SAVECFG DELAY 20000 INITIALPRINTER |
Wacht ongeveer 15 seconden totdat de printer automatisch opnieuw opstart.
RJ-2035B / 3035B:
Om de automatische Bluetooth-herverbinding tussen uw iOS / iPadOS-apparaat en de printer in te schakelen.
BT MODE BT2.1 SET BTLINKBACK ON |
BT MODE BT2.1 |
Start de printer opnieuw op.