TJ-4021TNR
 |
Veelgestelde vragen en probleemoplossing |
How to skip the AUTO.BAS program only one time by directly operating the printer
To skip the program at startup, or to calibrate, do the following:
-
Turn off the printer.
-
Press and hold the Feed/Pause Button and then turn on the printer.
-
Release the Feed button when the LED is lit in green.
The LED color will change in the following order:
Amber > Red (5 times) > Amber (5 times) > Green (5 times) > Green/Amber (blinks 5 times alternately) > Red/Amber (blinks 5 times alternately) > Green (lit) (Release the button here)
- The printer will start without running the AUTO.BAS program.