CM260
Veelgestelde vragen en probleemoplossing |
How do I Cut Around Drawings?
In this example, we will specify a seam allowance for a built-in pattern and draw the pattern, then cut an outline around it.
(1) Seam allowance line (2) Pattern outline (stitching line) (3) Seam allowance |
If appears in gray, the seam allowance cannot be applied.
>> The pattern in the preview appears with a drawing line (blue) and a cutting line (black).
Depending on the pattern, the seam allowance may be applied as a default. Check the setting.
To draw the seam allowance on the wrong side of the fabric, flip the pattern.
Image of Pattern Piece to be Created
(1) Right side of fabric
(2) Wrong side of fabric |
>> After attaching to the mat the fabric with the wrong side facing up, load the mat into the machine, flip the pattern, and then draw it and cut it out.
(1) Wrong side of fabric |
The cutting mats used by this machine have been redeveloped with a different design, type, function, etc.
For details, refer to “Important information about Mat”.
When drawing the seam allowance on the wrong side of the fabric, attach the material to the mat with its wrong side facing up.
>> A preview of the line to be drawn appears.
>> Touch + or - to change the settings.
>> A preview of the line to be cut appears.
After use, remove the pen from the pen holder, and then attach the cap to the pen before storing it.