Innov-is F460
Veelgestelde vragen en probleemoplossing |
How do I clean the race?
Sewing performance will suffer if lint and dust collects in the bobbin case, therefore, it should be cleaned regularly.
Unplug the power cord before cleaning the machine, otherwise injuries or an electric shock may occur.
For models that include the L-shaped screwdriver
You can also use the L-shaped screwdriver to remove the screw in the needle plate cover.
|
(1) Needle plate cover |
If there is no screw in the needle plate cover
(1) Needle plate cover |
Remove the bobbin case. Grasp the bobbin case, and then pull it out.
(1) Bobbin case |
(1) Cleaning brush
(2) Race |
Do not apply oil to the bobbin case.
|
(1) mark
(2) mark (3) Bobbin case |
Align the and marks. | |
Make sure that the indicated points are aligned before installing the bobbin case.
(1) Needle plate cover |
Tighten the screw in the needle plate cover firmly using the disc-shaped (or L-shaped) screwdriver if the screw was removed in step 6.