I cannot connect Wired LAN or WLAN when using the Active Docking Station.
Check the following:
-
Is the wired LAN cable connected correctly?
-
Is WLAN setting correctly completed?
-
Check the Wired LAN and WLAN (Infrastructure mode) settings of the printer.
Enable or disable the functions on the [Wired LAN] / [WLAN] menu to select either "Wired LAN", "WLAN (Infrastructure mode)", or "No connection" when the printer is on the Active Docking Station.
Wired LAN |
WLAN
(Infrastructure mode) |
Connection status when the printer is docked to the Active Docking Station |
ON |
ON |
WLAN (Infrastructure mode) -> Wired LAN |
ON |
OFF |
Wired LAN |
OFF |
ON |
WLAN (Infrastructure mode) |
OFF |
OFF |
No connection |
-
Wired LAN and Wi-Fi connection (Infrastructure mode) cannot be used at the same time.
-
If While cradled connect using wired LAN (turns off Wi-Fi infrastructure) in Communication Settings in the General tab of the Communication Settings Tool is checked, the settings of the main unit may be overwritten.