How do I connect the printer to my computer via wired LAN (Ethernet)? (for Windows)
-
To use a static IP address to connect your printer to a wired LAN connection, install the printer driver and Printer Setting Tool from the [Downloads] section of this website, and then specify the wired LAN connection settings.
-
You cannot use the wireless and wired function at the same time. Before you use the wired function, turn off the wireless function.
-
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
-
Connect the printer to the LAN port that is not subjected to overvoltage.
Follow the procedures below:
-
Download the printer driver and P-touch Editor from the [Downloads] section of this website.
-
Start the printer driver installer.
-
When the [Connection Type] dialog box appears, select [Wired Network Connection (Ethernet)]. Click [Next] and then follow the instructions to complete the installation.
-
Before connecting the LAN cable, make sure that the printer is turned Off.
-
Connect the LAN cable to the LAN Port on the back of the printer.
-
Connect the LAN cable to an active LAN Port on the network.
-
Turn on the printer.
-
Install and start P-touch Editor to create and print labels.