Print  |  Close

PR680W / PR680WC

FAQs & Troubleshooting

FAQs & Troubleshooting

How to configure operator lock

  1. Touch img01 , then img02 .
    The general settings screen appears.
     
  2. Locate [Passcode Setting] in the Settings pages.
     
  3. Touch [ON] beside [Operator Lock].

    img03
    • To change the passcode, continue with step 4.
    • If the passcode will not be changed, continue with step 8. (The initial passcode is 9999.)
  4. Touch img04 beside [Operator Lock].
     
  5. Type in the new passcode (4 digits).
     img05
     
  6. Type it in again for confirmation.
    • If a mistake was made while typing, start over with the first digit.
    img06
     
  7. Touch img07 .
    img08
     
  8. Touch img09 .
    Afterwards, each time the LCD screen is locked, the 4-digit passcode must be entered to continue operation.
    As shown below, img10 (Lock screen key) is displayed.
    img11

Print  |  Close