Print
|
Close
Innov-is F410
FAQs & Troubleshooting
Fabric puckers
There is a mistake in the upper or bobbin threading.
Check the steps for threading the machine and rethread it correctly.
Refer to
How do I set the bobbin ?
,
How do I thread the machine ?
Spool cap is set incorrectly.
Check the method for attaching the spool cap, then reattach the spool cap.
Refer to
How do I thread the machine ?
Using improper needle or thread for the selected fabric.
Check the
Fabric/Thread/Needle Combinations chart.
Refer to
Combination of fabric, thread and needle.
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to
How do I change the needle ?
Stitches are too long when sewing thin fabrics.
Shorten the stitch length.
Refer to
How do I adjust a stitch width or length ?
Thread tension is set incorrectly.
Adjust the thread tension.
Refer to
How to adjust the thread tension.
Wrong presser foot.
Use the correct presser foot.
Print
|
Close