JS1420
FAQs & Troubleshooting |
How do I change the needle ?
(1) Parallel space
(2) Level surface (bobbin cover, glass, etc.)
Always turn off the machine before you change the needle. Otherwise, injuries may occur if the foot controller is accidentally pressed and the machine starts sewing.
(1) Mark on the handwheel
Before replacing the needle, place fabric or paper under the presser foot to prevent the needle from falling into the hole in the needle plate.
(1) Use a screwdriver
(2) Needle clamp screw
Do not use excessive force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged.
(1) Use a screwdriver
(2) Needle stopper
(3) Needle
Make sure you insert the needle until it touches the stopper, and securely tighten the needle clamp screw with a screwdriver, otherwise the needle may break or the machine may be damaged.