CS-8060
FAQs & Troubleshooting |
How do I load the spool into the thread cassette?
When threading the upper thread, carefully follow the instructions.
If the upper threading is not correct, the thread may become tangled or the needle may bend or break.
The order for threading the thread cassette is indicated on the thread cassette.
Also check the markings on the thread cassette while threading it.
Open the thread cassette compartment cover at the top on the left side of the machine.
Thread cassette eject lever |
The thread cassette is raised.
Check that the sewing machine is turned on.
If the sewing machine is turned off, the thread cassette will not be ejected correctly.
Spool cap(orange) Spool pin Cover |
Spool |
Check that the thread unwinds from the left as described above.
Close until it clicks. |
Close until it clicks.
When using special thread such as metallic thread, use the thumb of your left hand to lightly press down on the area indicated in the illustration to create an opening that allows for easier threading.
Push Gap |
Notch |
Disc Cutter |
The spool of thread is now loaded in the thread cassette.
Be sure the thread is cut as described above,otherwise the needle threader cannot be used to thread the needle.