PR1000e
FAQs & Troubleshooting |
How do I install the bobbin wound with thread?
(1) Thread Picker
Thread picker is a device that is used to hold the thread when beginning to embroider or when trimming the thread.
The thread picker can only be moved within a certain range. Do not pull it with extreme force.
(1) Latch
Check that the thread winds off the bobbin clockwise as shown in the illustration.
If the bobbin is installed with the thread winding off in the opposite direction, the machine will not embroider correctly.
(1) Thread slit
(2) Tension-adjusting spring
(1) About 50 mm (2 inches).
(1) Tab
(2) Notch