Innov-is 1250D
FAQs & Troubleshooting |
How do I sew a blind hem?
Secure the bottoms of skirts and pants with a blind hem. Sew a blind hem according to the following procedure.
Be sure to turn off the main power before replacing the pressor foot. Otherwise, injuries may occur if Start/Stop button is accidentally pressed and the machine starts sewing.
When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not achieved.
Wrong side of fabric Right side of fabric Edge of fabric Bottom side |
|
Wrong side of fabric Right side of fabric Edge of fabric Desired edge of hem <Thick fabric> <Normal fabric> |
|
Wrong side of fabric |
|
|
|
Wrong side of fabric Right side of fabric Edge of fabric Desired edge of hem Basting point Basting <Thick fabric> <Normal fabric> |
|
||
|
Wrong side of fabric Fold of hem Guide |
Needle drop point |
When you change the needle drop point, raise the needle, and then change the stitch width.
Thick fabric Normal fabric |
<Normal fabric>
<Normal fabric>
|
folded hem |