Change LDAP Configuration Using Web Based Management
Use Web Based Management to configure your LDAP settings in a web browser.
-
Start your web browser.
-
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2
-
Type a password if you have set one, and then click .
-
Click Network on the machine's web page.
-
Click Protocol in the left navigation bar.
-
Select the LDAP check box, and then click Submit.
-
Restart your Brother machine to activate the configuration.
-
On your computer, in Web Based Management's Address Book tab, select LDAP in the left navigation bar.
-
LDAP Search
-
LDAP Server Address
-
Port (The default port number is 389.)
-
Search Root
-
Authentication
-
Username
This selection will be available depending on the authentication method used.
-
Password
This selection will be available depending on the authentication method used.
-
If the LDAP server supports Kerberos authentication, we recommend selecting Kerberos for the Authentication settings. It provides strong authentication between the LDAP server and your machine.
-
You must configure the SNTP protocol (network time server), or you must set the date, time and time zone correctly on the control panel for Kerberos authentication.
-
Kerberos Server Address
This selection will be available depending on the authentication method used.
-
Timeout for LDAP
-
Attribute of Name (Search Key)
-
Attribute of E-mail
-
Attribute of Fax Number
-
When finished, click Submit. Make sure the Status field reads OK.