FAQs & Troubleshooting

If your Brother machine's LCD displays the message, Not Registered when you try to dial a One-Touch or Speed Dial number, then there is not a One-Touch or Speed Dial number stored at the location you dialed.

You can verify the locations of your One-Touch and Speed Dial numbers by searching your Brother machine's Auto-Dial memory or by printing the Quick-Dial List, which lists the names and numbers in Auto-Dial memory in numerical order.

• To search your Brother machine's Auto-Dial memory, go to SECTION A: SEARCHING AUTO-DIAL MEMORY.
• To print the Quick-Dial List, go to SECTION B: PRINTING THE QUICK-DIAL LIST.

SECTION A: SEARCHING AUTO-DIAL MEMORY

1. Press the SEARCH/SPEED DIAL key.
    
2. Press the DOWN ARROW key.
    
3. Do one of the following:

    

   • To search by name, follow these steps:

      

     1. Use the dial pad to enter the first letter of the name you're searching for.
         
     2. Press the LEFT OR RIGHT ARROW key to choose a name.
         
     3. Press the MENU/SET key.
   If the LCD reads No Contact Found when you enter a letter of the name, you have not stored any names that begin with that letter.
   • To search all stored numbers alphabetically, follow these steps:

      

     1. Press the LEFT OR RIGHT ARROW key to choose a name.
         
     2. Press the MENU/SET key.
   • To search all stored numbers numerically, follow these steps:

      

     1. Press the UP OR DOWN ARROW key to choose a name.
         
     2. Press the MENU/SET key.

SECTION B: PRINTING THE QUICK-DIAL LIST

1. Press MENU/SET and choose Print Reports => Quick-Dial.
    
2. Press the Black (Mono) Start or Color (Colour) Start key. Your Brother machine will print the Quick-Dial List.
    
3. Press the STOP/EXIT key.