HL-1270N
 |
FAQs & Troubleshooting |
What kind of memory can I use?
This printer has 4 Mbytes of standard memory and one slot for optional expansion memory. The memory can be expanded up to 36 Mbytes by installing a commercially available single in-line memory modules(SIMM).
To see how to install additional memory, click here.
<Minimum memory recommendations>
Page Portect = AUTO or OFF
|
300 dpi |
600 dpi | |
|
Letter / A4 |
2 MB |
2 MB |
|
Legal |
2 MB |
2 MB |
Page Protection = Letter, A4, or Legal
|
300 dpi |
600 dpi | |
|
Letter / A4 |
2 MB |
6 MB |
|
Legal |
3 MB |
6 MB |
The SIMM with the following specifications can be installed:
|
Speed |
60 nsec to 80 nsec |
|
Pin type |
72 pin |
|
Height |
25.4 mm(1.00") or less |
|
Output |
32 bit or 36 bit |
- The printer has only one slot for a SIMM upgrade. If you want to increase your printed memory again after you have already installed a SIMM module in the slot, you will need to remove the previously installed SIMM.
- Addtional memory is useful and may be necessary if you are using the Page Protection function.