Movie: How to attach the External Roll Mount (Optional)
*The video clip is being streamed from YouTube.
-
Tighten the screws of the metal fittings of the extended plate.
![Extended plate Extended plate](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225792/05_step1.gif)
-
Attach the extended plate to the bottom of the printer.
![](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225797/05_step2.gif)
-
Insert a 76.2 mm (3") Label Spindle into the paper roll. Then, install it on the External Roll Mount.
![](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225798/05_step3.gif)
1. 76.2 mm (3") Label Spindle
-
Feed the media through the Rear Label Feed Slot.
![](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225803/05_step4.gif)
-
Open the Roll Compartment Cover. Slide the Roll Guides outwards, and then align the paper width with the Roll Guides. Push down the LOCK switch to lock the Roll Guides.
![](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225801/05_step5.gif)
-
Install the label. Turn the Media Guide Hub, and match the media guide width to the paper width.
![](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2264288/05_step6.gif)
-
Use the BPM (Brother Printer Management Tool) to set the paper size and the media sensor type, and calibrate the selected sensor.
-
Start the BPM. > Click the Printer Configuration button. > Set the Paper Width, Paper Height, Media Sensor and Gap in the FBPL tab, and click the Set button. > Make sure that the settings is activated by clicking the Get button.
![Printer Configuration Printer Configuration](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225796/03_configuration.gif)
-
Click the Printer Function button. > Set the media sensor type, and click the Calibrate button.
![Calibrate Calibrate](/g/b/img/faqend/faqp00100455_000/eu_ot/en/2225795/03_step8.gif)
Calibrate the Gap/Black Mark Sensor when changing media.