CM600
FAQ & Fehlerbehebung |
What should I do if I turn off the machine after gluing?
If you turn off the machine after gluing, adhere the foil according to the following procedure.
Do not stick any material or debris on the exposed glue.
(1) Pressing tool |
Place the foil on top of the pattern where the glue has been applied.
Place the protective sheet on the mat, and then secure it in place with commercially available tape, etc.
Load the mat in the same direction when gluing.
Start foiling by pressing Start / Stop button.
Feed out the mat, and then peel off the protective sheet and then carefully peel off the material from the mat.
Place the material on a level surface, and then slowly peel off the transfer sheet horizontally to the material.
Repeatedly dab the top of the foil with the dust removal sheet to remove any excess foil.